2024 MC 250F

2024 MC 250F

Description

It's our smallest 4-stroke but make no mistake, it's big on fun. It's also guaranteed to put a massive smile on your face! A high-revving racer with plenty of torque down low, the MC 250F caters for a huge range of riders. It doesn't matter if you're just starting out or chasing after championships titles, this bike is definitely for you! With a compact motor that revs all the way up to its 14,000rpm limit, it goes without saying... this thing absolutely rips!

BODYWORK All red and all-new! Fully redesigned from front to back, the sleek bodywork is incredibly ergonomic with larger contact surfaces and an improved rider triangle that further enhances control. The rad shrouds are shaped to help you grip the bike more as you get on the gas with a super grippy seat cover keeping you firmly in place.

FRAME A new generation bike is nothing without a new frame, right? Taking the best traits from the old frame, which if you didn't know combined razor-sharp cornering with confidence-inspiring straight line stability, our engineering wizards have made it even better! They've improved the anti-squat behavior for maximum traction when exiting corners. Throughout the frame, the wall thickness has been revised in certain areas to improve rider feedback and energy absorption. Finished with a red powder coating and grippy guards to prevent wear, which provide a little extra grip for your boots too.

MOTOR It was awesome before but our engineers have made the 250cc 4-stroke motor even better! More compact and lighter, the motor is tilted two degrees backwards in the frame to centralize mass for improved handling and you'll notice these changes as soon as you start picking up the pace on the race track. The motor's new position also lowers the sprocket by 3mm which improve's the bike's behaviour, especially under acceleration, as it holds up the rear end for better stability.

HYDRAULIC BRAKES Fast is fun but slowing down is essential, which is why all GASGAS motocross bikes are fitted with high quality Braktec calipers and controls. With a 260mm front disk and a 220mm rear disk, both featuring a GASGAS specific design, braking performance is certainly impressive, which inspires riders to push harder, ride faster, and brake later using the redesigned lever.

ENGINE MANAGEMENT SYSTEM - EMS Small, light, and fast at processing data - just what you need from an engine management system! The Vitesco Technologies component is the best in the business and includes a rollover sensor that cuts the ignition during big crashes, as well as feeding information to the hour meter.

Specifications

  • ENGINE
    add remove
    • Engine Type
      Single-Cylinder
    • Cylinders
      1
    • Engine Stroke
      4-Stroke
    • Valve Configuration
      DOHC
    • Bore (in)
      3.2
    • Stroke (in)
      1.9
    • Displacement (cc)
      249.9
  • TECHNICAL SPECIFICATIONS
    add remove
    • Dry Weight (lbs)
      224.2
    • Fuel Capacity (gal)
      2.1
    • Engine Displacement to Weight (cc)
      1.11
    • Ground Clearance (in)
      13.9
  • SUSPENSION
    add remove
    • Front Suspension Brand Name
      WP XACT
    • Front Suspension Type
      Inverted Fork
    • Front Suspension Size (in)
      1.9
    • Front Travel (in)
      12.2
    • Front Adjustable Fork Pre-Load
      Yes
    • Front Adjustable Rebound Damping
      Yes
    • Front Central Suspension Strut
      No
    • Rear Suspension Brand Name
      WP XACT
    • Rear Suspension Type
      Twin Sided Swing Arm
    • Rear Travel (in)
      11.8
  • WHEELS & TIRES
    add remove
    • Front Tire (Full Spec)
      Maxxis® Maxx Cross MX-ST 80/100 - 21
    • Rear Tire (Full Spec)
      Maxxis® Maxx Cross MX-ST 110/90 - 19
  • BRAKES
    add remove
    • Front Brake Type
      Hydraulic Disc
    • Front Brake Diameter (in)
      10.2
    • Rear Brake Type
      Hydraulic Disc
    • Rear Brake Diameter (in)
      8.7
    • Brake Brand Name
      Brembo®
  • Color options
    add remove
    • Red